|
The Hermes + is the newest option for industrial labelling with print and apply. The truly versatile Hermes + can feature tamp, blow and wipe on action in an all new compact package. 
 1 - Big graphic display
White back light guarantees clarity of display.
Depending on the fitting position the display can be
turned in steps of 90°.
2 - Navigator pad
Simple, interactive menu control. Applicable functions
are illuminated. Menu handling is easy to comprehend.
3 - Ribbon retainer
The three part tightening axles allow a fast and easy
ribbon exchange.
4 - Solid, buckling resistant metal chassis
It is made of dye-cast aluminum.
All devices are assembled to it.
5 - Mounting of the applicator
The applicator is mounted on hinges and can be
exchanged easily.
6 - Printing offset
After exchanging the label roll the printing position is set up
automatically after a few printed labels. The label position is
stored, even if the machine is turned off.
7 - Printhead
The printhead can be exchanged easily. Adjustments and
setups are not necessary.
8 - Transport system
The ball bearing transport rollers ensure a highly accurate
printing and the precise feeding of labels.
9 - Label unwinder
The swing lever and the integrated brake make sure that
the labels are unwound with constant tension.
10 - Rewinder
The liner of a label roll is rewound after the labels have
been peeled off. The clamping shafts enable an easy
exchange of the roll.
1. Compressed Air Supply Unit
Assembled to the printer, frame or stand
The micro filter avoids contamination,
the pressure regulator ensures the print
and apply quality.
2. Long operating life
All guides have ball bearings and are
therefore resistant to wear.
3. Variable product heights
The lift cylinder allows labelling in
different heights. It is standard
available in 200/300/400 mm length.
More lengths on request.
4. High process reliability
The supporting air jet streaming
and the induction air as well as the
lifting speed are adjustable and
controlled via sensors.
5. Real time application
Applicators for small and big labels
permit the application of labels with
a height of 25 - 250 mm
and a width of 20 - 116 mm.
6. Protective cover (shown above)
Used in the semi-automatic operation mode
Standard size 1 for labels W x H up to 70 x 80 mm
2 for labels W x H up to 116 x 80 mm
Further sizes on request.
7. Retractable applicator
Easy and fast access to the printers ’mechanics
or material change or for maintenance work.
|
