visytech.com

 
REAjet ST PDF Print E-mail

The REA-JET standard coding and marking system is especially designed to meet the requirements in harsh ambient conditions such as dust, humidity, vibrations, large variations in temperature and aggressive substances.


The patented REA-JET print head technology guaranties a high level of system availability and ease of use with little maintenance required.

Extreme fast operating print heads allow products to pass by the print head at a speed of up to 300 m/min while print image quality remains excellent.

The user friendly operator prompting of the system is dialog oriented and easy to learn. Individual software programming and customized adaptations according to customer requirements can be carried out by the system operator via input terminal. System interfaces are open to operator configurations.

In the unlikely event that a printer problem is encountered, which cannot readily be resolved by the operator, the module identified as requiring additional attention can be removed and replaced by the operator in a matter of minutes. This philosophy of design for "Replacement and not Repair" ensures that the printer is operational in the shortest period of time.

The module requiring further attention can then be repaired with the minimum impact to the production cycle.
The REA-JET industrial ink jet based coding and marking system is designed to work in many varied industrial environments encountered in today´s workplace. Coding can take place on a large variety of substrates such as porous and non-porous surfaces at a variable print height in between 3 and 67 mm. The systems marks all sorts of products with logos, bar codes, best before dates, heat and consignment numbers, programmable counters, consecutive numerations and production data (time, date, shift). The marking can take place from above, upside down and sidewise.

Print head and controller are dustproof and spray water protected (IP65).

A comprehensive interface concept allows the most convenient integration of the REA-JET system into existing computer and production infrastructures.

Application samples:

Barrels

Cardboard

Paletts

Steel

Stone

Wood

Print possibilities and technical data

Print heads

  • Nozzle size: 80µ, 130µ, 180µ, 270µ, 350µ
  • 7-Dot: print height 3 - 27 mm (single line)
  • 16-Dot: print height 3 - 67 mm (single and double line)

Print matrix

  • 5 x 5; 7 x 5; 10 x 10; 16 x 10

Printspeed

  • 1.000 Strokes/sec.
  • 140 characters/sec. at matrix 7 x 5
  • 80 characters/sec. at matrix 16 x 10

Print possibilities:

  • Selectable print delay
  • Character spacing, height and character width adjustable
    Combinations of variable and constant texts within a single print line
  • Consecutive numerations
  • Universal counter with variable incrementation, 6-digit, incremental, decremental numbering
  • Real-time clock with variable calendar
  • Logos programmed by the operator
  • Automatic text repeat
  • Bar codes: 2/5 Interleaved, Code 39
  • Storage of texts and calling via code
  • Character orientation normal, upside down, forwards, backwards
  • Proportionally spaced printing
  • Usage of fast drying and pigmented inks possible

Interface

  • seriell RS 232/422 (optional)

Power Supply

  • 230/115V AC ±10% 50/60 Hz, 110VA

Operation Environment

  • Temperatures -5°C to +45°C
  • Air humidity 10 - 90%, non-condensing

System protection rating

  • IP 65 (dust proof and spray water protectet)

Dimensions

  • Print head 7-Dot
    (Diameter 60 mm x 100 mm)
  • Print head 16-Dot
    (Diameter 100 mm x 100 mm)
  • Controller unit
    149 mm x 109 mm x 262 mm
  • Input terminal
    255 mm x 165 mm x 50 mm